A
non-HAPs, non-hazardous, non-regulated, mildly alkaline, high
foaming, residue free (silicate-free), Zero VOC, enhanced worker
safety, environmentally friendly, biodegradable, and extended
bath life, heavy duty aqueous Ink and adhesive remover. It
removes cured and uncured water-based inks, polymeric inks, adhesives,
lacquers, and varnishes from flexographic press equipment.
The product carries a complete corrosion Inhibition
package and rinse aid technology. Suitable for use in ultrasonic immersion washers,
low pressure spray and tumblers.
A
non-HAPs, non-hazardous,
non-regulated, mildly alkaline, low foaming,
residue free (silicate-free), Zero VOC, enhanced worker safety, environmentally
friendly, biodegradable, and extended bath life, heavy duty aqueous
industrial cleaner for removing water, solvent and uv-cured
inks, as well as adhesives, latex polymers, grease, oil s and cutting
fluids. The
product carries a complete corrosion Inhibition package and rinse
aid technology. Suitable for use in ultrasonic immersion washers,
high pressure spray, spray under immersion, tumblers, etc.
GLOBE
KLEEN™ – 2001
(low emission, solvent-based viscous ink and
adhesive remover, a suitable replacement for caustic-based
cleaners, Methylene Chloride, mineral spirits, acetone, MEK,
acetates, etc.
Enhanced worker
safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs,
non-Chlorinated, Non-Aerosol, BIODEGRADABLE solvent-based cleaner
designed to remove water, oil, UV-cured and solvent based inks and
varnishes as well as ADHESIVE & LATEX POLYMER REMOVER FOR FLEXOGRAPHIC
& ROTOGRAVURE PRINTING INDUSTRIES. This product is water soluble,
mild pH and user friendly, It provides fast, residue free and complete
removal of cured or uncured inks and varnishes from flexographic
press equipment, such as doctor blades, filters, lockup holders,
fittings, connectors, ink pans, transfer pails, drums, anilox rollers
and other press equipment.
Enhanced worker safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs, non-Chlorinated, Non-Aerosol, BIODEGRADABLE solvent-based cleaner designed to remove Flexible and Rigid TWO COMPONENT Polyurethane Foam Adhesives. It cleans like Acetone & Methylene Chloride without the hazards. It is effective on both MDI, polyester-polyols and polyether-polyols as well as cured polyurethane adhesives. It provides fast, residue free, and complete removal of cured or un-cured rigid urethane foam deposits and buildup from mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam cutting devices, holding tanks, feed lines and mixing equipment. This product cleans down to the bare metal surfaces; it is easy to use.
