Extremely effective in removing cured or uncured orthophthalic,
isophthalic, dicyclopentadiene, vinyl ester and epoxy resins. In addition,
it will also remove adhesives, pigmented gel coats and other coatings
including high & low solid aliphatic, waterborne epoxy primers, polyurethane,
acrylic, varnish and alkyl enamel.
BOND
BREAKER ™ - 2000 (low emission, solvent based graffiti remover,
a suitable replacement for Methylene Chloride, acetone, MEK, acetate,
etc.)
Enhanced worker safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs, non-Chlorinated, non-Aerosol, BIODEGRADABLE solvent-based GRAFFITI Remover. The product is extremely effective in breaking molecular bond between the paint and the surface. It will effectively remove graffiti from metals, walls, stone, brick, traffic signs, granite, telephone stalls, and aluminum siding and highway signs. It is safe on Aluminum and its alloys. No heating required, no residues following cleaning process, just rinse with water. The product contains no Phenols, Butyl Cellosolve, Acetone, MEK, Xylene, Toluene, and Methylene Chloride, Mineral Spirits or other aromatic/aliphatic hydrocarbons.
D-BOND ™ HTS
(low emission, solvent-based paint stripper for aircraft components,
a suitable replacement for Methylene Chloride, acetone, MEK,
acetates, etc.)
Enhanced
worker safety, environmentally friendly, non-hazardous, non-flammable,
non-HAPs, NON-CHLORINATED, BIODEGRADABLE SOLVENT-BASED HOT TANK PAINT
STRIPPER. It
meets Spec SS8786 issued by Sikorsky Aircraft – United Technologies.
It is also suitable for other applications required by military,
commercial aircrafts, U.S. Navy and their sub-contractors. It is
extremely effective in removing cured or uncured orthophthalic, isophthalic,
dicyclopentadiene, vinyl ester and epoxy resins. In addition, it
will also remove adhesives, pigmented gel coats and other coatings
including high & low solid aliphatic, waterborne epoxy primers, polyurethane,
acrylic, varnish and alkyl enamel. The product replaces acetone,
MEK, Methylene Chloride and Phenols.
GP
2000 ™
COATING REMOVER (low emission, solvent-based viscous version paint
stripper for aircraft components, a suitable replacement for Methylene
Chloride, acetone, MEK, acetates, etc.)
Enhanced worker safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs, non-Chlorinated, BIODEGRADABLE solvent-based viscous paint stripper. It is effective in removing cured or uncured orthophthalic, isophthalic, cyclopentadiene, vinyl ester and epoxy resins as well as adhesives, pigmented gel coats, high & low solid aliphatic, waterborne epoxy primers, polyurethane, acrylic, varnish and alkyd paints. The product replaces acetone, MEK, Methylene Chloride and Phenols.
