"Drop-In" replacement
for Acetone, removal of cured or uncured polyester resin, vinylester
resin (ORTHOPHTHALIC / ISOPHTHALIC / DICYCLOPENTADIEN) and epoxy resin
from rollers, brushes, chopper guns, mixing, cutting and laminating
equipment as well as Injection Mold. Superb performance. High resin
loading. Use as is (no heating is required). Suitable Acetone replacement,
MEK replacement, Methyl Chloride replacement, Xylene / Toluene / Alcohol
replacement.
A
non-HAPs, non-hazardous,
non-regulated, mildly alkaline, high foaming,
residue free (silicate-free), Zero VOC, enhanced worker safety,
environmentally friendly, biodegradable, and extended bath life,
heavy duty aqueous liquid emulsifier for cured and uncured polyester,
epoxy, latex polymers, coating and adhesives as well as polyurethane
foam build-up on process equipment. The product carries a
complete corrosion Inhibition package and rinse aid technology. Suitable
for use in ultrasonic immersion washers, low pressure spray and
tumblers.
Superb
performance, enhanced worker safety, environmentally friendly,
non-hazardous, non-flammable,
non-HAPs, non-Chlorinated, Non-Aerosol,
BIODEGRADABLE solvent-based resin remover. FRP- Ultra™ is a “Drop-In” replacement
for acetone, MEK and caustic based cleaners. It is designed to
effectively remove cured or uncured orthophthalic, isophthalic,
dicyclopentadiene, vinyl ester and epoxy resins from your rollers,
brushes, mixing equipment and spray chopper guns.
SURF
X - FLUSH™ 2000(low emission, solvent-baesd Urethane foam cleaner, a suitable
replacement for Methylene Chloride, acetone, MEK, acetates, etc.)
Enhanced worker safety, environmentally
friendly, non-hazardous, non-flammable, non-HAPs, non-Chlorinated,
non-Aerosol, BIODEGRADABLE solvent-based cleaner designed to remove
Flexible and Rigid TWO COMPONENT Polyurethane Foam Adhesives. It
cleans like Acetone & Methylene Chloride without the hazards. It
is effective on both MDI, polyester-polyols and polyether-polyols
as well as cured polyurethane adhesives. It provides fast, residue
free, and complete removal of cured or un-cured rigid urethane foam
deposits and buildup from mixing heads, gear pumps, troughs, side
walls, conveyor parts, rollers, molds, foam cutting devices, holding
tanks, feed lines and mixing equipment. This product cleans down
to the bare metal surfaces; it is easy to use. In addition, Surf
X – Flush™ 2000 eliminates disposal costs by recycling the spent
material via vacuum distillation.
