Roofing - Spray Foam and Injection Mold
- Flexible and Rigid two component Polyurethane foam Adhesives cleaning
applications
Cleaning two-component urethane spray equipment, effective
on MDI, polyether polyols, and polyester polyols, as well as cured
flexible and rigid polyurethane foam mainly for urethane spray equipment
clean up. These cleaners are as effective as Methylene Chloride, but
without the associated hazards. The products clean like Acetone and
Methylene Chloride - without the hazards and are effective for both
MDI and TDI esters as well as cured reactive hot melt polyurethane
adhesives. Use the product as is; no heating is required. The cleaners
provide fast, residue free, and complete removal of cured or un-cured
rigid urethane foam desposits and buildup from mixing heads, gear pumps,
troughs, side walls, conveyor parts, rollers, molds, foam cutting devices,
holding tanks, feeding lines and mixing equipment. In addition, they
eliminate disposal costs by recycling the spent material via vacuum
distillation.
Say "No" to Methylene Chloride, Acetone and MEK
FOAM
OFF™ – MPP (low emission, solvent-based Urethane foam cleaner,
a suitable replacement for Methylene Chloride, acetone, MEK,
acetates, etc.)
Enhanced
worker safety, environmentally friendly, non-hazardous, non-flammable,
non-HAPs, NON-CHLORINATED,
NON-AEROSOL, BIODEGRADABLE SOLVENT-BASED
cleaner designed to remove Flexible and Rigid TWO COMPONENT Polyurethane
Foam Adhesives. It
cleans like Acetone & Methylene Chloride without the hazards. It
is effective on both MDI, polyester-polyols and polyether-polyols
as well as cured polyurethane adhesives. It provides fast, residue
free, and complete removal of cured or un-cured rigid urethane
foam deposits and buildup from mixing heads, gear pumps, troughs,
side walls, conveyor parts, rollers, molds, foam cutting devices,
holding tanks, feed lines and mixing equipment. This product cleans
down to the bare metal surfaces; it is easy to use. In addition,
FOAM Off™- MP ELIMINATES disposal costs by recycling the spent
material via vacuum distillation.
SURF
X - FLUSH™ 2000 (low emission,
solvent-based Urethane foam cleaner, a suitable replacement for Methylene
Chloride, acetone, MEK, acetates, etc.)
Enhanced worker
safety, environmentally friendly, non-hazardous, non-flammable,
non-HAPs,
non-Chlorinated,
non-Aerosol, BIODEGRADABLE solvent-based cleaner
designed to remove Flexible and Rigid TWO COMPONENT Polyurethane
Foam Adhesives. It cleans like Acetone & Methylene Chloride without
the hazards. It is effective on both MDI, polyester-polyols and polyether-polyols
as well as cured polyurethane adhesives. It provides fast, residue
free, and complete removal of cured or un-cured rigid urethane foam
deposits and buildup from mixing heads, gear pumps, troughs, side
walls, conveyor parts, rollers, molds, foam cutting devices, holding
tanks, feed lines and mixing equipment. This product cleans down
to the bare metal surfaces; it is easy to use. In addition, Surf
X – Flush™ 2000 eliminates disposal costs by recycling the spent
material via vacuum distillation.
A non-HAPs, non-hazardous,
non-regulated, mildly alkaline, high foaming, residue free (silicate-free), Zero VOC, enhanced worker safety, environmentally friendly, biodegradable, and extended bath life, heavy duty aqueous Ink and adhesive remover. It removes cured and uncured water-based inks, polymeric inks, adhesives, lacquers, and varnishes from flexographic press equipment. The product carries a complete corrosion Inhibition package and rinse aid technology. Suitable for use in ultrasonic immersion washers, low pressure spray and tumblers.
GLOBE
KLEEN™ – 2002 (low emission, solvent-based viscous resin remover
and adhesive remover, a suitable replacement for caustic-based cleaners,
Methylene Chloride, mineral spirits, acetone, MEK, acetates, etc.)
Enhanced worker safety, environmentally
friendly, non-hazardous, non-flammable,
non-HAPs, NON-CHLORINATED,
NON-AEROSOL, BIODEGRADABLE SOLVENT-BASED cleaner designed to remove
cured or uncured polyester, vinyl ester, epoxy, polyurethane foam
and other coatings from tanks, totes, tools as well as other plant
and maintenance equipment; no heating required, no residues following
cleaning process.
